On 6/26/2011, the paranormal group I am with went on a ghost hunt and it gave me time to test out the response from using a minimum theremin in detecting spirit energy.
The minimum theremin is a theremin with the volume controls absent from the circuit. This means that all signals come out at the same level.
This is similar to the Mel meter with EMF radiating antenna. This is the Mel-8704REM device.
In observing the Mel-8704REM in field situations I feel certain that the range of the minimum theremin that I am using is at least twice as large of a radiating field that the mel meter. I am getting radiating ranges around and above 12 inches from the antenna.
This presented a problem in holding the device, so I hacked together a solution so the theremin is held well away from the body.
I am in the middle of testing, but I can say that the device works really well.
Instance number one was a bit difficult, as the spirits were showing a hesitation in touching the antenna of the unit. One spirit in particular said it looked like a sword. Yes, the device is a bit unusual and the antenna is a shiny silver, but it does take a lot of convincing that the antenna is harmless. Spirits that are not as timid are more likely to be friendly and tend to feel comfortable with the device.
A child was reported going near the unit, at which I did receive a small sound. However, the unit was close to my body, so I couldn't readily confirm a hit.
The second instance was a communication session with several spirits. At the point where one spirit attached to one of the other team members, I was standing in the range of 4-5 feet away from the member and I had strong readings from the unit right in the middle of the ambient space.
The unit is not too particular about what objects it will detect as the tombstones in the cemetery were triggering the unit.
In the final test of the unit for the day, I handed the unit over to the group founder/leader and the unit did receive another hit in the middle of ambient space. The hit was fairly quick which actually adds a bit of credence to the device.
What works best with the unit is that it does not move quickly through the environment. It has a tendency to pick up things over time much better than instantly grabbing energies in the area.
I am currently using a headphone amplifier to get signals from the theremin. This will eventually be output to a speaker, so the audio may be picked up on recorders.
I will post more data when it becomes available.
No comments:
Post a Comment